Peerless DCT600 Fiche technique

Naviguer en ligne ou télécharger Fiche technique pour Accessoires de fixation aux murs et aux plafonds Peerless DCT600. Peerless DCT600 Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
T E C H N I C A L D A T A S H E E T
Peerless Industries, Inc. 3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com
page 1 of 1
A R C H I T E C T S S P E C I F I C A T I O N S
The I-beam clamp shall be a Peerless model DCT____ Multi Display I-beam Clamp and shall be mounted where indicated
on the plans. It shall consist of a clamping I-beam interface with an integral decoupler assembly to relieve stress (caused by
side to side or swaying action that may result from minor impacts) from damaging TVs/monitors. It shall be constructed of
heavy gage cold rolled steel and finished in scratch resistant black fused epoxy. It shall be UL Listed. Assembly and installa-
tion shall be done according to the instructions provided by the manufacturer.
Model: DCT600, DCT700
Issued:01-27-00 Sheet No. 128-9524-2 02-20-02
Heavy Duty I-Beam Clamp
with Decoupler
The Heavy Duty I-Beam Clamp with Decoupler is designed to anchor a
Peerless Multi-Display System to an overhead I-beam. The stub fitting
is compatible with Peerless (ADD model) Adjustable Length Extension
Columns. The built in decoupler absorbs structural vibrations.
Features:
Adjustable Clamping I-beam interface
Decoupler
Scratch-resistant black fused epoxy finish
Important:
Architect or installer must verify that the I-beam will safely support
the combined load of all attached hardware and components.
**Combined weight of all attached hardware and components.
I-Beam Clamp with Decoupler
Weight
12.6 lbs.
(5.7 kg)
Shipping
Weight
13.1 lbs.
MIN MAX
15” 19.5”
(381 mm) (495 mm)
AB
I-BEAM CROSS-SECTION
ISOMETRIC VIEW
DECOUPLER
STUB
SIDE VIEW
**Maximum
Load
600 lbs.
(272 kg)
B
A
WARNING: If multi-display system, in combination
with components exceeds 600 lbs. (272 kg) it
therefore exceeds the maximum load. Heavy Duty
I-Beam Clamp with Decoupler will not safely
support a combined load which exceeds 600 lbs.
(272 kg)!
15” 19.5”
(381 mm) (495 mm)
2.5” 3”
(64 mm) (76 mm)
MIN MAX
1.5” 2”
(38 mm) (51 mm)
(6 kg)
(6 kg) (272 kg)
(6.2 kg)
13.1 lbs.
13.6 lbs.
600 lbs.
MODEL #
DCT600
DCT700
5.375”
© 2002 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
This product must be
installed by a qualified,
professional installer.
R
Vue de la page 0
1

Résumé du contenu

Page 1 - Heavy Duty I-Beam Clamp

T E C H N I C A L D A T A S H E E TPeerless Industries, Inc. 3215 W. North Ave. Melrose Park, IL 60160708-865-8870 800-865-2112 Fax 708-865-2

Commentaires sur ces manuels

Pas de commentaire